If you've ever looked at your garage floor and seen pitting, oil stains, hot tire marks, and concrete dust on everything you own, you already know why a professional coating is one of the highest-impact upgrades you can make.
Apex Epoxy Surfaces installs professional-grade epoxy and polyaspartic garage floor systems throughout the Omaha metro. Every project starts with proper diamond grinding and concrete prep, not a quick acid wash — that's the difference between a coating that peels in two winters and one that lasts.
Problems This Service Solves
- Constant concrete dust on tools, cars, and storage
- Oil, antifreeze, and chemical stains that won't come out
- Hot tire pickup that lifts and peels lower-quality coatings
- Salt and slush damage from Nebraska winters
- Cracked, pitted, or spalling concrete that keeps getting worse
Where It Works Best
- Single, double, and three-car attached garages
- Detached garages and shop floors
- Workshops, hobby garages, and storage bays
- Garages used as gyms or workspaces
Surface Preparation
Coating quality and lifespan come from the prep. Here's what's typically involved before any coating goes down:
- Inspect the slab for moisture, cracks, joints, and prior coatings
- Diamond grinding to open the concrete profile for a real mechanical bond
- Crack and joint repair with appropriate fillers
- Spot patching of pitted or spalled areas
- Clean and vacuum the slab before any coating goes down
Coating System Options
Single-Coat Epoxy + Topcoat
Solid color or light flake with a clear protective topcoat. Good balance of cost and performance for general garage use.
Decorative Flake (Full Broadcast)
Color-matched chip blend broadcast into the base coat and sealed with a polyaspartic clear. Excellent traction, depth, and stain hiding.
Polyaspartic Topcoat System
Polyaspartic clear over a primer/base coat. UV-stable, fast-cure, and very durable — ideal for garages that take heavy use.
Hybrid Epoxy / Polyaspartic
Epoxy base for chemical resistance and a polyaspartic topcoat for UV stability and faster return-to-service.
What to Expect on the Project
- Free on-site consultation and slab evaluation
- Recommendation: prep scope, coating system, color, and finish
- Schedule the install around your access and timeline
- Day 1: prep, repairs, and base coat (with flake broadcast if selected)
- Day 2: excess flake removal, sanding, and clear topcoat
- Walk-through and care instructions before we leave
Honest Timing
Most residential garages are completed in just a few days, depending on size, concrete condition, and the coating system. Cure milestones for foot traffic, furniture placement, and parking vary by system, weather, and slab condition — we'll walk you through the exact timeline for your project before installation.
Maintenance
- Sweep regularly; damp-mop with mild soap and water
- Use plastic furniture pads under heavy stationary loads
- Avoid harsh acids or solvents
- Wipe up automotive fluids relatively quickly
Pricing Factors
Every project is unique. We provide pricing as ranges based on the specific factors below — see typical investment ranges for context.
- Square footage of the garage
- Condition of the concrete (cracks, pitting, prior coatings)
- Moisture present in or under the slab
- Coating system selected (epoxy, polyaspartic, hybrid)
- Color and finish (solid vs. full flake broadcast)
- Site access, prep tear-out, and removal of existing coatings
Frequently Asked Questions
Related Services
Get Your Free Garage Floor Coatings Quote
Tell us about your space and we'll put together a detailed quote and recommended coating system.